shadow

Polishing wheels

MOLEMAB’s new grinding wheel generation for flute- and cutting edge polishing.
The application of these grinding wheels permits the flute and cutting edge processing of solid carbide cutting tools. Matt-finished for META Gloss and high-gloss finished for POLY Gloss.

Using solid carbide cutting tools with polished cutting edges offers considerable advantages particularly with regard to the processing of:

- Aluminium, copper and brass
- Titanium
- Wood
- Plastics
- Laminated materials
- Tools for hard machining

Solid carbide cutting tools with polished cutting edges guarantee:

- Optimized cutting edge geometry with no chunking
- Better chip removal
- Longer service life
- Reduced temperature development
- Optimized surface quality
- Reduced power consumption of the machine tool

In order to ensure the success of the polishing wheels you have to comply with the following requirements:

- The grinding wheel must be balanced (if possible fixed on the flange) before usage
- The grinding wheel must be dressed in the grinding machine
- The grinding machine and the spindle bearing must be in good order and condition

Only, if all these conditions are met the successful application of the abrasive wheel can be guaranteed.

Diagram

Poly Gloss HD  
Grinding wheel 1A1 und 1V1  
Max. cutting depth 0.10 mm
Cutting speed 27 m/s
Feed rate 50 - 100 mm/min
Grinding wheel 11V9  
Max. cutting depth 0.1 mm
Cutting speed 27 - 30 m/s
Feed rate 50 - 100 mm/min
Grinding wheel 12V9  
Max. cutting depth 0.1 mm
Cutting speed 27 - 30 m/s
Feed rate 20 - 60 mm/min